HydroClip™ Eucalyptus Fitted Sheet & Waterproof Mattress Protector

1000+ Happy Customers

HydroClip™ Eucalyptus Fitted Sheet & Waterproof Mattress Protector

$179.00

Taxes included. Free Shipping on All Orders.

Tested vs. Leading Competitors
Melbourne Support Team
Subscription Free: Save ~$400 to ~$800/year compared to Eight Sleep.

Size Long Single King Single Queen King Super King

Rated 4.8 Stars

Free Shipping

30-Day Returns

PRODUCT DESCRIPTION

Stop the sheet slipping off the corner.

If you own an Eight Sleep Pod, an OAK SLEEP HUB, or a Chilipad, you know the hose is the problem. Tucked under the mattress or threaded behind the bedhead, it pushes back against the fitted sheet all night — untucking a corner, lifting the elastic, dragging the sheet loose as you move. You wake up to an exposed corner and a sheet bunched at your feet.

HydroClip™ fixes the cause, not the symptom. A full-height opening down the side skirt, closed by a YKK® clip built into the elastic itself, lets the hose exit through the side instead of running underneath. Nothing pushing against the sheet. The elastic stays fully tensioned, the corners stay anchored, and the sheet stays where you put it.

And because the clip releases, you can still change your bedding without disconnecting the hose.

One package, two items: a waterproof mattress protector and a fitted sheet, both with the HydroClip™ opening built in.

Ultra-thin Austrian eucalyptus, engineered for thermal transfer and tested not to interfere with in-pad sensors. 30 seconds to change the bed, with the water still running.

We built HydroClip™ the way we wanted it to work, not the way everyone else does it — we use it on our own beds every night, and we don't sell anything we wouldn't use ourselves.

Colour

Snow White — a soft, natural off-white, not a stark bleached white. Balanced as close to true white as possible while keeping bleaching chemicals to a minimum.

Materials and certification

100% Austrian Tencel™ eucalyptus, 300 thread count, Lenzing certified. Waterproof protector uses a breathable TPU membrane — silent, not vinyl.

OEKO-TEX® Standard 100 certified. FSC® and PEFC™ certified forestry. No polyester, no microplastics against your skin.

Care

Machine wash cold, gentle cycle. Tumble dry low or line dry. No bleach, no fabric softener — softener coats the fibre and reduces thermal transfer.

Shipping, Warranty + Returns

SHIPPING

Australian Stock
Free Shipping on All Orders
Same day dispatch before 1PM (Leaving Melbourne)
Metro: 1-4 Days
Regional: 3-8 Days
New Zealand: 6-9 Days*

WARRANTY

Melbourne Support Team
Click here for the Warranty Policy.

RETURNS

30 Day Returns
Click here for the Return Policy.

Stop the sheet slipping off the corner

Cooling pad hoses can push against a fitted sheet from underneath, lifting the elastic and pulling the corner loose.

HydroClip™ routes the hose through a full-height side opening so the elastic stays tensioned and the sheet stays anchored in place.

01 / 04

One package
two items

waterproof mattress protector and a fitted sheet, both with the HydroClip™ opening built in.

02 / 04

Ultra-thin
Austrian eucalyptus

engineered for thermal transfer and tested not to interfere with in-pad sensors. 30 seconds to change the bed, with the water still running. We built HydroClip™ the way we wanted it to work, not the way everyone else does it — we use it on our own beds every night, and we don't sell anything we wouldn't use ourselves.

03 / 04

Tested with
Eight Sleep and competing systems

Smart sleep systems read your body through sensors in the pad. Most bedding sits between the two and degrades the signal. We tested HydroClip™ across Eight Sleep and competing sensor-equipped systems. Sensor readings remain uninterrupted. Sleep tracking, temperature response and automatic adjustment all perform as designed — because the fabric is thin enough and conductive enough to stay out of the way.

04 / 04

Thermal
transmission

Your cooling system can only cool you through whatever you put on top of it. Thick cotton or polyester sheets act as insulation, forcing the unit to work harder and respond slower. Our 300TC Austrian eucalyptus is among the thinnest natural-fibre sheets available, with exceptionally high thermal transmission. Heat and cold move through it rather than banking up in it. You feel temperature changes faster, and your system holds setpoint more easily.

Compatibility and sizing

Size	Dimensions (L × W)	Fits mattresses up to	Compatible Pads
Long Single	203 × 92cm	45cm deep	OAK SLEEP HUB, Chilipad
King Single	203 × 107cm	45cm deep	OAK SLEEP HUB, Chilipad
Queen	203 × 152cm	50cm deep	Eight Sleep, OAK SLEEP HUB
King	203 × 182cm	50cm deep	Eight Sleep, OAK SLEEP HUB
Super King	203 × 203cm	50cm deep	Eight Sleep, OAK SLEEP HUB

Long Single

Dimensions
203 × 92cm

Fits mattresses up to
45cm deep

Compatible Pads
OAK SLEEP HUB, Chilipad

King Single

Dimensions
203 × 107cm

Fits mattresses up to
45cm deep

Compatible Pads
OAK SLEEP HUB, Chilipad

Queen

Dimensions
203 × 152cm

Fits mattresses up to
50cm deep

Compatible Pads
Eight Sleep, OAK SLEEP HUB

King

Dimensions
203 × 182cm

Fits mattresses up to
50cm deep

Compatible Pads
Eight Sleep, OAK SLEEP HUB

Super King

Dimensions
203 × 203cm

Fits mattresses up to
50cm deep

Compatible Pads
Eight Sleep, OAK SLEEP HUB

Chilipad fit: Chilipad's hose and tank setup suits Long Single and King Single sizes best. Queen, King and Super King aren't a good match for Chilipad's configuration - those sizes are built for Eight Sleep and the OAK SLEEP HUB.

Buying for half a bed? Long Single and King Single sheets fit a Long Single or King Single mattress only - not one side of a larger bed. If your cooling pad is a Long Single or King Single sitting on half of a King or Super King bed, you need the King or Super King sheet set to cover the full bed width.

Clip ports: one on the left side, one centred at head or foot. Super King includes three. Ports may not align on half-coverage or third-party pads.

Where the tube exits

Clip ports sit on the left side and centred at the head or foot — Super King has three. Whichever side your hub, control unit or wall outlet sits on, there's an exit that runs straight to it.

The opening runs the full height of the skirt, so the hose can exit level with the top of the mattress or anywhere below. Your tube sits where it wants to, not where the bedding forces it.

Do I need special sheets for an Eight Sleep Pod?

Standard fitted sheets work, but the hose must then run under the mattress or behind the bedhead, where it kinks and lifts the sheet. HydroClip™ sheets have a side opening that routes the hose out horizontally and lets you change bedding without disconnecting.

Will a mattress protector affect Eight Sleep sensors?

A thick or dense protector can degrade sensor readings and slow temperature response. The HydroClip™ protector uses ultra-thin eucalyptus tested across Eight Sleep and competing systems, with sensor readings uninterrupted.

What sheets work with Chilipad?

Chilipad's hose and tank setup suits Long Single and King Single sizes best — HydroClip™ includes side openings for Chilipad Cube and Dock Pro hose routing in those sizes. Queen, King and Super King HydroClip™ sheets are sized for Eight Sleep and the OAK SLEEP HUB rather than Chilipad.

How do you hide the Eight Sleep hose?

Most people run it under the mattress or behind the bedhead. Both kink the tube. A side-opening sheet lets it exit horizontally at mattress height and run straight to the hub.

Can you put a mattress protector over a cooling mattress pad?

Yes, provided it's thin enough to transmit heat and cold. Thick quilted protectors insulate the pad and reduce its effectiveness.

Do I have to disconnect my cooling system to wash the sheets?

Not with HydroClip™. The clip releases so the sheet comes off around a connected hose, with no disconnection, spillage or re-priming.

The OAK SLEEP promise

No subscription,

ever.

App-free.

EMF-free

Designed in

Melbourne, Australia.

Your cart is empty